by Various
Nails was more than most responsible for the very existence of U.N. Space Lab One, and Project Hot Rod besides. He was also a sponsor of many other projects, both those that had been done and those that were yet to be done.
The justification of a space project in these times was difficult indeed; for no longer could nations claim military superiority as a main reason for pushing forward across the barriers of the inner marches of space; for spending billions in taxes in experimental research. For a project to achieve reality now, it must have benefits, visible benefit, for the majority of mankind. It must have a raison d'être that had nothing of a military flavor. And occasionally Nails had been hard put to explain why, to people who did not understand; to explain his feeling that men must expand or die; that from a crowded planet there could be only one frontier, and that an expansion outward into space.
Of course there were, Nails admitted to himself, other frontiers. The huge basin of the Amazon had been by-passed and ignored by man, and quite possibly would be in the future as well. The oceans, covering seventy-five per cent of Earth's surfaces also presented a challenge to man, and the possibility of a new frontier of conquest.
But these did not present the limitless frontier for expansion offered by space. Men must look upon them as only temporary challenges, and cherish them as remaining problems, never to be solved for fear of a loss of the problem itself.
Yet space was different. Here man's explorations could touch upon infinities that were beyond comprehension, into that limitless void man could plunge ever outward for thousands of generations without ever reaching a final goal or solving a last problem. Here was a frontier worthy of any man, against which the excess energies of a warrior spirit might be expended without harm to their fellows.
To open a crack in this frontier was Nails' supreme goal, because, once opened, men need never fight again amongst themselves for lack of a place to go or a thing to do.
* * * * *
Space Lab One had been in spin for two days.
On Earth, TV viewers no longer demanded twenty-four hours of Lab newscasts, and were returning to their normal cycles of Meet the Press, the Doctor's Dilemma, and the Lives of Lucy, and other juicier items of the imagination that, now that their lab was a functioning reality, seemed far more exciting than the pictures of the interminably spinning wheel and the interviews with scientists aboard that had filled their screens during the spin-out trial period.
On the wheel itself, life was settling into a pattern, with comments about being able to stand upright becoming old hat.
In rim sector A-9, Dr. Claude Lavalle's birds and beasts had adapted themselves to the light gravity; and their biological mentor had evolved feeding, watering, and cleaning methods that were rapidly becoming efficient.
Next door, Dr. Millie Williams' FARM had survived the "take-off" and the plants, grateful for their new, although partial gravity, were now stretching themselves towards the overhead fluorescents in a rather fantastic attempt to imitate the early growing stages of Jack's famous beanstalk.
In the machine shop, Paul Chernov carefully inspected the alignment of the numeric controlled laser microbeam milling and boring machine, brought it to a focus on a work piece, and pressed an activation switch that started the last pattern of tiny capillary holes in the quartz on which he was working. In moments the pattern was completed.
Gently removing the work piece from its mounting, he turned to the open double bulkhead that served as an air lock in emergencies and that separated his shop from the physics lab beyond, where Dr. Y. Chi Tung, popularly known as Ishie, was busy over a haywire rig, Chief Engineer Mike Blackhawk and Tombu beside him.
Reverently, Dr. Chi took the part from Paul's hands. "A thousand ancestral blessings," he said. "Confusion say the last piece is the most honored for its ability to complete the gadget, and this is it.
"Of course," he added, "Confusion didn't say whether it would work or not."
"What does the gadget do?" asked Paul.
"Um-m-m. As the European counterpart of Confusion, Dr. Heisenberg might have explained it, this is a device to confuse confusion by aligning certainties and creating uncertainties in the protons of this innocent block of plastic." The round, saffron-hued Chinese face looked at Paul solemnly.
"As the good Dr. Heisenberg stated, there is a principle of confusion or uncertainty as to the exact whereabouts of things on the atomic level, which cannot be rendered more exact due to disturbance caused by the investigation of its whereabouts. My humble attempt is to secure a sufficiently statistical sample of aligned protons to obtain data on the distortion of the electron orbits caused by an external electrostatic field, thus rendering my own uncertainties more susceptible of analysis in a statistical manner."
Suddenly he grinned. "It's a take-off," he said, "from the original experiments in magnetic resonance back in '46.
"The fields generated in these coils are strong enough to process all the protons so that their axis of spin is brought into alignment. At this point, the plastic could be thought of as representing a few billion tiny gyroscopes all lined up together.
"Matter of fact," he said in an aside, "if you want a better explanation of that effect, you might look up the maintenance manual on the proton gyroscopes that Sad Cow uses. Or the manuals for the M.R. analyzer in the chem lab. Or the magnetometer we use to keep a check on Earth's magnetic field.
"So far, about the same thing.
"What I'm trying to do is place radio frequency fields and electrostatic fields in conjunction with the D.C. magnetic field, so as to check out the effect of stretching the electron orbits of the hydrogen atoms in predictable patterns.
"I picked this place for it, because it was as far away from Earth's field as I could get. And Mike, when I get ready to test this thing, I'm going to pray to my ancestors and also ask you to turn off as many magnetic gadgets as you safely can."
Mike was squatting on his heels by the haywire rig, built into what looked suspiciously like a chassis extracted from one of the standard control consoles of the communication department.
Reaching gingerly in through the haywire mass of cables surrounding the central components, he pointed to one of the coils and exclaimed in the tones of a Sherlock Holmes, "Ah-ha, my dear Watson! I have just located the final clue to my missing magnaswedge. I suppose you know the duty cycle on those coils is only about 0.01?"
"Not after I finished with them!" Ishie grinned unrepentant. "Besides, I don't want to squash anything in the field. I just want a nice, steady field of a reasonable magnitude. As Confusion would say, he who squashes small object may unbalance great powers."
* * * * *
While he talked, Ishie had been busy inserting the carefully machined piece of quartz plate that Chernov had brought, into a conglomeration of glassware that looked like a refugee from the chem lab, and flipped a switch that caused a glowing coil inside a pyrex boiler to heat a small quantity of water, which must escape through the carefully machined capillary holes in the plate he had just installed. Each jet would pass through two grids, and on towards a condenser arrangement from which the water would be recirculated into the boiler by a small pump which was already beginning to churkle to itself.
"O.K.," Mike said. "I dig the magnetic resonance part. And how you're using the stolen coils. But what's this gadget?" and he pointed to the maze of glass and glass tubing.
"Oh. Permit me to introduce Dr. Ishie's adaptation of a French invention of some years previous, which permits the development of high voltages by the application of heat to the evaporation of a fluid medium such as water--of which we have plenty aboard and you won't miss the little that I requisitioned--causing these molecules to separate and pass at high speed through these various grids, providing electrostatic potentials in their passage which can be added quite fantastically to produce the necessary D.C. field which...."
As he spoke, Mike's finger moved nearer a knob-headed bolt that seemed to be one of the two holding the
glass device to its mounting board, and an inch and a half spark spat forth and interrupted the dissertation with a loud "Yipe!"
"Confusion say," Ishie continued as Mike stuck his finger in his mouth, "he who point finger of suspicion should be careful of lurking dragons!
"Anyhow, that's what it does. There are two thousand separate little grids, each fed by its capillary jet, and each grid provides about ninety volts."
Tombu took the opportunity to inquire, "Have you got that RF field-phase generator under control yet?" He pointed to still another section of the chassis.
"Oh, yes." The physicist nodded. "See, I have provided a feedback circuit to co-ordinate the pick-up signal with the three-phase RF output. The control must be precise. Can't have it skipping around or we don't get a good alignment."
There was a gurgling churkle from the innocent-looking maze as the "borrowed" aerator pump from the FARM supplies began returning the condensate back to the boiler.
* * * * *
Major Steve Elbertson stood on the magnetic stat-walk of the south polar loading lock, gazing along the anchor tube to Project Hot Rod five miles away.
"There are no experts in the ability to maneuver properly in free fall," he told himself, quieting his dissatisfaction with his own self-conscious efforts at maintaining the military dignity of the United Nations Security Forces in a medium in which a man inevitably lost the stances that to him connotated that dignity.
Awkwardly, he attached the ten-pound electric device affectionately known to spacemen as the scuttlebug, to the flat ribbon-cable that would both power and guide him to Hot Rod.
As the wheels of the scuttlebug clipped over the ribbon-cable, one above and two below, and made contact with the two electrically conductive surfaces, he saw the warning light change from green to red, indicating that the ribbon was now in use, and that no one else should use it until he had arrived at the far end.
Seeing that the safety light was now in his favor, he swung his legs over the seat--a T-bar at the bottom of the rod which swung down from the drive mechanism--grasped the rod, and pulled the starting trigger.
The accelerative force of one gee, the maximum of which the scuttlebug was capable, provided quite a jolt, but settled down very quickly to almost zero as he picked up speed and reached the maximum of one hundred twenty miles per hour.
A very undignified method of travel, he thought. Yet for all that, the scuttlebugs were light and efficient, and reduced transit time between outlying projects and the big wheel to a very reasonable time, compared to that which it would take for a man to jump the distance under his own power--and, he thought, without wasting the precious mass that rockets would have required.
The low voltage power supplied by the two flat sides of the ribbon was insufficient to have provided lethal contact, even if the person were there without the insulation of a spacesuit around him, a very unlikely occurrence. Furthermore, the structure of the cable, with the flat, flexible insulation between its two conductive surfaces, made it practically impossible to short it out; and the flanged wheels of the scuttlebug clipped over it in such a fashion that, once locked, it was thought to be impossible that they could lose their grip without being unlocked.
As Steve gained speed along the ribbon, "his" Project Hot Rod was in view before him--appearing to be a half moon which looked larger than the real moon in the background behind it; and seeming to stand in the vastness of space at a distance from the far end of the long anchor tube, a narrow band of bright green glowing near its terminator line.
From the rounded half of the moon, extending sunward, four bright, narrow traceries seemed to outline a nose that ended in a pale, globular tracery at its tip, pointing to the sun.
The narrow traceries were in actuality four anchor tubes, similar to the one beside which he rode; and mounted in their tip was the directing mirror that would aim Hot Rod's beam of energy.
* * * * *
Project Hot Rod was actually a giant balloon eight thousand feet in diameter, one-half "silvered" with a greenish reflective surface inside that reflected only that light that could be utilized by the ruby rods at its long focal center; and that absorbed the remainder of the incident solar radiation, dumping it through to its black outside surface, and on into the vastness of space. This half of the big balloon was the spherical collector mirror, facing, through the clear plastic of its other half, the solar disk.
Well inside the balloon, at the tip of the ruby barrel that was its heart, were located the boiler tubes that activated the self-centering inertial orientation servos which must remain operational at all times. If the big mirror were ever to present its blackened rear surface to the sun for more than a few minutes, the rise in temperature would totally destroy the entire project. Therefore, these servos had been designed as the ultimate in fail-safe, fool-proof control to maintain the orientation of the mirror always within one tenth of one degree of the center of Sol.
Their action was simplicity itself. The black boiler tubes were shielded in such a way that so long as the aim was dead center on the sun they received no energy; but let the orientation shift by a fraction of a degree, and one of these blackened surfaces would begin to receive reflected energy from the mirror behind it; the liquid nitrogen within would boil, and escape under pressure through a jet in such manner as to re-orient the position to the center of the tracking alignment.
Since the nitrogen gas escaped into the balloon, the automatic pressure regulator designed to maintain pressure within the balloon would extract an equal quantity of gas, put it back through the cooling system on the back side of the mirror, and return it as liquid to the boiler.
These jets were so carefully and precisely balanced that there was virtually no "hunting" in the system.
The balloon itself was attached to its anchor tube by a one hundred meter cable that gave free play to these orientation servos. The anchor point was the exact center of the black outside surface of the mirror-half of the balloon; and beside that anchor point was the air lock to the control center, to which Steve was now going.
From the control room, a column extended up through the axis of the balloon for thirty-five hundred feet--and most of the surface of this column was covered with the new type, high power ruby rods, thirty feet long and one-half inch in diameter, mounted in tubular trays of reflective material which took up sufficient space to make each rod occupy two inches of the circumference of the tube on which it was mounted.
These ruby rods were the heart of the power system, converting the random wave fronts of noncoherent light received from the mirror into a tremendous beam of coherent infrared energy which could be bundled in such a pattern as to reach Earth's surface in a focal point adjustable from here to be something between twenty-two feet in diameter to approximately one mile in diameter.
The banks of rods were so arranged that each of the one hundred sections comprising the three thousand feet of receptive surface at the focus of the mirror formed a concentric circle of energy beams; each circle becoming progressively smaller in diameter, so that the energy combined into one hundred concentric circles, one within the other, as it left the rods; but these circles were capable of the necessary focusing that could bring them all together into a single small point near Earth's surface.
* * * * *
The beam leaving the rods represented three hundred seventy-five million watts of energy, tightly packaged for delivery to Earth. But this was only a small fraction of the solar energy arriving at the big mirror.
The remainder, the loss, must be dumped by the black surface at the back; and to account for the loss in the rods themselves, to prevent their instantaneous slagging into useless globules of aluminum oxide, their excess loss energy must also be dumped.
A cooling bath of liquid nitrogen therefore circulated over each rod and brought the excess heat to the rear of the big lens, where it, too, could be dumped into the blackness of space beyond.
For all its size and complexity, Hot Rod
was only a trifle over six per cent efficient; but that six per cent of efficiency arriving on Earth would be highly welcome to supplement the power sources that statistics said were being rapidly depleted.
The spherical shape of the mirror itself, one of the easiest possible structures to erect in space, had dictated the placement of the rods through its center since there was no single focal point for the entire mirror surface.
But it had also added a complication. From this position, the rods could have been designed to fire either straight forward or straight back.
However, due to the hollow nature of the thirty-five hundred foot laser barrel; the necessity for access to the rods from inside that barrel; and the placement of the control booth at its outside end, the firing could only be forward, straight towards the sun on which the mirror was focused.
But to be useful, the beam must be able to track an ever-moving target.
This problem had been solved by one of the largest mirror surfaces that man had ever created--flat to a quarter of a wave-length of light, and two hundred fifty feet in diameter, the beam director, from this distance looking as though it were a carelessly tossed looking-glass from milady's handbag, anchored one diameter forward of the big power balloon.
For all its size, this director mirror had very little mass. Originally it had been planned to be made of glass in much the same manner as Palomar's 200-inch eye. But this plan had been rejected on the basis of the weight involved.
Instead, its structure was a rigid honeycomb of plastic; surfaced by a layer of fluorocarbon plastic which had been brought to its final polish in space, and then carefully aluminized to provide a highly reflective, extremely flat surface.
This mirror was also cooled by the liquid nitrogen supplied from the back side of the big mirror. Necessarily so, since even its best reflectivity still absorbed a sufficient portion of the energy from the beam it deflected to have rapidly ruined it if it were not properly cooled.