The Perfectionists

by Simon Winchester

  Monasteries were the first to employ timekeepers, the monks having a need to awaken and observe in some detail the canonical hours, from Matins to Compline by way of Terce, None, and Vespers. And as various other professions and callings started to appear in society (shopkeepers, clerks, men of affairs bent on holding meetings, schoolteachers due to instruct to a rigid schedule, workers on shifts), the need for a more measured knowledge of numerical time pressed ever more firmly. Toilers in the fields could always see or hear the hour on the distant church clock, but city dwellers late for a meeting needed to know how many minutes remained until the “appointed hour” (a phrase that gained currency only in the sixteenth century, by which time public mechanical clocks were widely on display).

  On land, it was the railways that most prolifically showed—one might say defined—the employment of time. The enormous station clock was more glanced at than any other feature of the building; the image of the conductor consulting his (Elgin, Hamilton, Ball, or Waltham) pocket watch remains iconic. The timetable became a biblically important volume in all libraries and some households; the concept of time zones and their application to cartography all stemmed from railways’ imprint of timekeeping on human society.

  Yet, before the chronological influence of railways, there was one other profession that above all others truly needed the most precise timekeeping. It was that which had been developing fast since the European discovery of the Americas in the fifteenth century and the subsequent consolidation of trade routes to the Orient: the shipping industry.

  Navigation across vast and trackless expanses of ocean was essential to maritime business. Getting lost at sea could be costly at best, fatal at worst. Also, because the exact determination of where a ship might be at any one moment was essential to the navigation of a route, and because one part of that determination depends, crucially, on knowing the exact time aboard the ship and, even more crucially, the exact time at some other stable reference point on the globe, maritime clockmakers were charged with making the most precise of clocks.*

  And none was more sedulously dedicated to achieving this degree of exactitude than the Yorkshire carpenter and joiner who later became England’s, perhaps the world’s, most revered horologist: John Harrison, the man who most famously gave mariners a sure means of determining a vessel’s longitude. This he did by painstakingly constructing a family of extraordinarily precise clocks and watches, each accurate to just a few seconds in years, no matter how sea-punished its travels in the wheelhouse of a ship. An official Board of Longitude was set up in London in 1714, and a prize of twenty thousand pounds offered to anyone who could determine longitude with an accuracy of thirty miles. It was John Harrison who, eventually and after a lifetime of heroic work on five timekeeper designs, would claim the bulk of the prize.

  Harrison’s legacy is much treasured. The curator of the Greenwich Royal Observatory, high on its all-seeing hill above the Maritime Museum to the east of London, comes in each dawn to wind the three great clocks that he and his staff are disposed simply to call “the Harrisons.” He stands on much ceremony to wind them, well aware of the immense historical importance invested in the three timepieces and their one unwound sibling. Each was a prototype of the modern marine chronometer, which, in allowing ships to fix their positions at sea with accuracy, has since saved countless sailors’ lives. (Before the existence of the marine chronometer, before ships’ masters had the ability to determine exactly where they were, vessels tended to collide with importunate frequency into islands and headlands that loomed up unexpectedly before their bows. Indeed, it was the catastrophic collision off the Cornish coast of Admiral Sir Cloudesley Shovell’s squadron of warships in 1707 [which drowned him and two thousand of his sailors] that compelled the British government to think seriously about the means of figuring out longitude—setting up a Board of Longitude and offering prize money—which led, ultimately, to the making of the small family of clocks that are wound each dawn at Greenwich.)

  There were other reasons for the vast importance of the Harrisons. By allowing ships to know their positions and plot their voyages with efficiency, accuracy, and precision, these clocks and their successors enabled the making of untold trading fortunes. And though it may no longer be wholly respectable to say so, the fact that the Harrison clocks were British-invented and their successor clocks firstly British-made allowed Britain in the heyday of her empire to become for more than a century the undisputed ruler of all the world’s oceans and seas. Precise-running clockwork made for precise navigation; precise navigation made for maritime knowledge, control, and power.

  And so the curator pulls on his white curatorial gloves and, using in each case a unique double set of brass keys, unlocks the tall glass-sided cabinets in which the great timekeepers stand. Each of the three is on near-permanent loan from Britain’s Ministry of Defence. The earliest made, finished in 1735 and known these days as H1, the curator can wind with a single strong downward pull on a chain made of brass links. The later pair, the midcentury H2 and H3, require simply a swift turn of a key.

  The final device, the magnificent H4 “sea watch” with which Harrison eventually won his prize money, remains unwound and silent. Housed in a five-inch-diameter silver case that makes it look rather like an enlarged and biscuit-thick version of grandfather’s pocket watch, it requires lubrication and, if it runs, will become less precise with time as the oil thickens; it will lose rate, as horologists say. Moreover, if H4 were kept running, only its second hand would be seen to be moving, and so, as spectacle, it would be somewhat uninteresting—and as a trade-off for the inevitable wear and tear of the movement beneath, the sight of a moving second hand made no sense. So the decision of the observatory principals over the years has been to keep this one masterpiece in its quasi-virgin state, much like the unplayed Stradivarius violin at the Ashmolean Museum in Oxford,* as an untouched testament to its maker’s art.

  And what sublime pieces of mechanical art John Harrison made! By the time he decided to throw his hat in the ring for the longitude prize, he had already constructed a number of fine and highly accurate timekeepers—most of them pendulum clocks for use on land, many of them long-case clocks, each one more refined than the last. Harrison’s skills lay in the imaginative improvement of his timekeepers, rather than in the decorative embellishment that many of his eighteenth-century contemporaries were known for.

  He was fascinated, for instance, with the problem of friction, and in a radical departure from the norm, he made all his early clocks with wooden gearwheels, which needed none of the lubricant oils of the day, oils that became notoriously more viscous with age and had the trying effect of slowing down most clockwork movements. To solve this problem, he made all his gear trains first of boxwood and then of the dense, nonfloating Caribbean hardwood Lignum vitae, combined in both cases with pivots made of brass. He also designed an extraordinary escapement mechanism, the ticking heart of the clock, that had no sliding parts (and hence no friction, either) and that is still known as a grasshopper escapement because one of the components jumps out of engagement with the escape wheel, just as a grasshopper jumps suddenly out of the grass.

  A portable precision clock designed for use on a rolling ship cannot easily use a long gravity-driven pendulum, however, and the first three timepieces Harrison designed for the contest were powered by systems of weights that look very different from the heavy plumb bobs that hang in a conventional long-case clock. They are instead brass bar balances that look like a pair of dumbbells, both placed vertically on the outer edges of the mechanism and its wheel trains, and connected at their tops and bottoms by pairs of springs, which provide the mechanism with a form of artificial gravity, as Harrison wrote. These springs allow the two balance beams to swing back and forth, back and forth, nodding toward and away from each other endlessly (provided that the white-gloved curator, successor on land to the ship’s master at sea, winds the mechanism daily) as the clock ticks on.

  H1, H2, and
H3, each clock a subtle improvement upon its predecessor, each the work of years of patient experimentation—H3 took Harrison fully nineteen years to build—employ essentially the same bar balance principle, and when they are working, they are machines of an astonishing, hypnotic beauty and seemingly bewildering complexity. Many of the improvements that this former carpenter and viola player, bell tuner and choirmaster—for eighteenth-century polymaths were polymaths indeed—included in each have gone on to become essential components of modern precision machinery: Harrison created the encaged roller bearing, for example, which became the predecessor to the ball bearing and led to the founding of huge modern corporations such as Timken and SKF. And the bimetallic strip, invented solely by Harrison in an attempt to compensate for changes in temperature in his H3 timekeeper, is still employed in scores of mundane essentials: in thermostats, toasters, electric kettles, and their like.

  As it happened, none of these three fantastical contraptions, however beautiful in appearance and revolutionary in design they may have been, turned out to be a success. Each was taken to a ship and used by the crew as timekeeper, and each time, though the timekeeper offered an improvement on surmising the ships’ various positions, the accuracy of the vessel’s clock-derived longitude was wildly at variance from what the Board of Longitude demanded—and so no prize was awarded. Harrison’s genius and determination were recognized, though, and hefty grants continued to come his way in the hope that he would, in time, make a horological breakthrough. And this he did, at last, when between the four years from 1755 until 1759 he made not another clock, but a watch, a watch that has been known, since it was cleaned and restored in the 1930s, simply as H4.*

  The watch was a technical triumph in every sense. After thirty-one years of near-obsessive work, Harrison managed to squeeze almost all the improvements he had engineered in his large pendulum clocks into this single five-inch silver case, and add some others, to make certain that his timekeeper was as close to chronological infallibility as was humanly possible.

  In place of the oscillating beam balances that made the magic madness of his large clocks so spectacular to see, he substituted a temperature-controlled spiral mainspring, together with a fast-beating balance wheel that spun back and forth at the hitherto unprecedented rate of some eighteen thousand times an hour. He also had an automatic remontoir, so-called, which rewound the mainspring eight times a minute, keeping the tension constant, the beats unvarying. There was a downside, though: this watch needed oiling, and so, in an effort to reduce friction and keep the needed application of oil to a minimum, Harrison introduced, where possible, bearings made of diamond, one of the early instances of a jeweled escapement.

  It remains a mystery just how, without the use of precision machine tools—the development of which will be central to the story that follows—Harrison was able to accomplish all this. Certainly, all those who have made copies of H4 and its successor, K1 (which was used on all Captain James Cook’s voyages), have had to use machine tools to fashion the more delicate parts of the watches: the notion that such work could possibly be done by the hand of a sixty-six-year-old John Harrison still beggars belief.

  Once his task was completed, he handed the finished watch over to the Admiralty for its crucial test. The instrument (in the care of Harrison’s son William, who acted as its chaperone) was taken aboard the HMS Deptford, a fifty-gun fourth-rate ship of the line, and sent out on a five-thousand-mile voyage from Portsmouth to Jamaica.* Careful observation at the end of the trip showed the watch to have accumulated a timekeeping error of only 5.1 seconds, well within the limits of the longitude prize. Over the entire 147 days of a voyage that involved a complex and unsettling stormy return journey (in which William Harrison had to swaddle the timekeeper in blankets), the watch error was just 1 minute 54.5 seconds, a level of accuracy never imagined for a seaborne timekeeping instrument.

  And while it would be agreeable to report that John Harrison then won the prize for his marvelous creation, much has been made of the fact that he did not. The Board of Longitude prevaricated for years, the Astronomer Royal of the day declaring that a much better way of determining longitude, known as the lunar distance method, was being perfected, and that there was therefore no need for sea clocks to be made. Poor John Harrison, therefore, had to visit King George III (a great admirer, as it happens) to ask him to intercede on his behalf.

  A series of humiliations followed. H4 was forced to be tested once again, and recorded an error of 39.2 seconds over a forty-seven-day voyage—once again, well within the limits set by the Board of Longitude. Harrison then had to dismantle the watch in front of a panel of observers and hand his precious instrument to the Royal Observatory for a ten-month running trial to check (once again, but this time on a stable site) its accuracy. It was torturous and vexing for the now-elderly Harrison, who at seventy-nine was becoming increasingly and understandably embittered by the whole procedure.

  Finally, and thanks in large part to King George’s intervention, Harrison did get almost all his money. The popular memory of him, though, is of a genius hard done by, and his great clocks and the two sea watches, H4 and K1, remain the most potent memorials, three of them beating out the time steadily and ceaselessly as a reminder of how their maker, with his devotion to precision and accuracy in his craft work, helped so profoundly to change the world.

  THE ANTIKYTHERA MECHANISM, then, was a device remarkable and precise in its making and aspect, but its inaccuracy and understandably amateurish construction rendered it unreliable and, in practical terms, well-nigh useless. John Harrison’s timekeepers, though, were both precise and accurate, but given that they took years to make and perfect, and were the result of hugely costly craftsmanship, it would be idle to declare them either as candidates or as the fountainhead for true and world-changing precision. Also, though intending no disrespect to an indelible technical achievement, it is worth noting that John Harrison’s clockworks enjoyed perhaps only three centuries’ worth of practical usefulness. Nowadays, the brassbound chronometer in a ship’s chart room, just like the sextant kept in its watertight morocco box, is a thing more decorative than essential. Time signals of impeccable accuracy now come across the radio. The digital readout of longitude and latitude coordinates come to a ship’s bridge from a Global Positioning System’s (GPS) interrogation of faraway satellites. Clockwork machines, however beautifully their gears may be cut and enclosed in casings, however precious and intricately engraved, are a creation of yesterday’s technology, and are retained nowadays by and large for their precautionary value only: if the seagoing vessel loses all power, or if the master is a purist with a disdain for technology, then John Harrison’s works have real practical worth. Otherwise, his clocks gather dust and salt, or are kept in glass cases, and his name will begin to slip gradually astern, to vanish inevitably and soon in a sea fret of history, way stations at the beginning of the voyage.

  For precision to be a phenomenon that would entirely alter human society, as it undeniably has done and will do for the foreseeable future, it has to be expressed in a form that is duplicable; it has to be possible for the same precise artifact to be made again and again with comparative ease and at a reasonable frequency and cost. Any true and knowledgeable craftsman (just like John Harrison) may be able, if equipped with sufficient skill, ample time, and tools and material of quality, to make one thing of elegance and evident precision. He may even make three or four or five of the same thing. And all will be beautiful, and most will inspire awe.

  Large cabinets in museums devoted to the history of science (most notably at Oxford and Cambridge and Yale) are today filled with such objects. There are astrolabes and orreries, armillary spheres and astraria, octants and quadrants, and formidably elaborate sextants, both mural and framed, which are to be seen in particular abundance, most of them utterly exquisite, intricate, and assembled with a jeweler’s care.

  At the same time, all of each instrument was perforce made by hand. Every gear
was hand-cut, as was every component part (every mater and rete and tympan and alidade, for example; astrolabes have their own quite large vocabulary), every tangent screw and index mirror (words relating to sextants are similarly various). Also, the assembly of each part to every other and the adjustment of the assembled whole—all had to be accomplished with, quite literally, fingertip care. Such an arrangement produced fine and impressive instruments, without a doubt, but given the manner in which they were made and how they were put together, they could necessarily have been available only in rather limited numbers and to a small corps d’élite of customers. They may have been precise, but their precision was very much for the few. It was only when precision was created for the many that precision as a concept began to have the profound impact on society as a whole that it does today.

  And the man who accomplished that single feat, of creating something with great exactitude and making it not by hand but with a machine, and, moreover, with a machine that was specifically created to create it—and I repeat the word created quite deliberately, because a machine that makes machines, known today as a “machine tool,” was, is, and will long remain an essential part of the precision story—was the eighteenth-century Englishman denounced for his supposed lunacy because of his passion for iron, the then-uniquely suitable metal from which all his remarkable new devices could be made.

  IN 1776, THE forty-eight-year-old John Wilkinson, who would make a singular fortune during his eighty years of life, had his portrait painted by Thomas Gainsborough, so he is far from an uncelebrated figure—but if not uncelebrated, then not exactly celebrated, either. It is notable that his handsome society portrait has for decades hung not in prominence in London or Cumbria, where he was born in 1728, but in a quiet gallery in a museum far away in Berlin, along with four other Gainsboroughs, one of them a study of a bulldog. The distance suggests a certain lack of yearning for him back in his native England. And the New Testament remark about a prophet being without honor in his own country would seem to apply in his case, as Wilkinson is today rather little remembered. He is overshadowed quite comprehensively by his much-better-known colleague and customer, the Scotsman James Watt, whose early steam engines came into being, essentially, by way of John Wilkinson’s exceptional technical skills.