Pihkal

by Alexander Shulgin

  (with 32 mg) At a plateau at two hours, with just a bit of tummy queasi-ness. And I am still at the plateau several hours later.

  Sleep finally at the 18th hour, but even after getting up and doing all kinds of things the next day, I was not completely baseline until that evening. And a couple of days more for what is certainly complete repair. That is a lot of mileage for a small amount of material.

  EXTENSIONS AND COMMENTARY: Here is the first example, ever, of a phen-ethylamine that is of about the same potency as therelated three-carbon amphetamine. At first approximation, one is hard put to distinguish, from the recorded notes, any major differences either in potency, in duration, or in the nature of activity, between 2C-G and GANESHA itself.

  I had always thought of the phenethylamines as being somewhat weaker than the corresponding amphetamines. Sometimes a little weaker and sometimes a lot weaker. But that is a totally prejudiced point of view, an outgrowth of my earliest comparisons of mescaline and TMA.

  That's the kind of thing that can color oneUs thinking and obscure what may be valuable observations. It is equally valid to think of the phenethylamines as the prototypes, and that the amphetamines are somewhat stronger than the corresponding phenethylamines. Sometimes a little stronger and sometimes a lot stronger. Then the question suddenly shifts from asking what is different about the phenethylamines, to what is different about the amphetamines? It is simply a historic fact, that in most of my exploring, the amphetamine was made and evaluated first, and so tended to slip into the role of the prototype. In any case, here the two potencies converge.

  28 2C-G-3; 2,5-DIMETHOXY-3,4-(TRIMETHYLENE)PHENETHYLAMINE; 5-(2-AMINOETHYL)-4,7-DIMETHOXYINDANE) SYNTHESIS: To a solution of 22 g of KOH in 250 mL of hot EtOH, there was added 50 g of 4-indanol and 75 g methyl iodide. The mixture was held at reflux for 12 h. There was then added an additional 22 g KOH

  followed by an additional 50 g of methyl iodide. Refluxing was continued for an additional 12 h. The mixture was poured into 1 L

  H2O, acidified with HCl, and extracted with 3x75 mL CH2Cl2. The pooled extracts were washed with 5% NaOH, then with dilute HCl, and the solvent was removed under vacuum. The residue of crude 2,3-(trimethylene)anisole weighed 56.5 g and was used without further purification in the following reaction.

  A mixture of 327 g N-methylformanilide and 295 g POCl3 was allowed to incubate until a deep claret color had formed. To this there was then added 110 g of crude 2,3-(trimethylene)anisole, and the mixture heated on the steam bath. There was a vigorous evolution of gases, which largely quieted down after some 4 h of heating. The reaction mixture was added to 4 L H2O and stirred overnight. The oily aqueous phase was extracted with 3x200 mL CH2Cl2, and after combining the extracts and removal of the solvent there was obtained 147 g of a black, sweet-smelling oil. This was distilled at 182-194 !C at the water pump to yield 109.1 g of a pale yellow oil. At low temperature, this crystallized, but the solids melted again at room temperature. Gas chromatography of this product on OV-17 at 185 !C showed detectable starting anisole and N-methylformanilide (combined, perhaps 5% of the product) and a small but real isomeric peak, (about 5%, slightly faster moving than the title aldehyde, again about 5% of the product) of what was tentatively identified as the ortho-aldehyde (2-methoxy-3,4-(trimethylene)-benzaldehyde). The bulk of this crude product (74 g) was redistilled at 110-130 !C at 0.3 mm/Hg to give 66 g of 4-methoxy-2,3-(trimethylene)benzaldehyde as a nearly colorless oil which set up as a crystalline solid. A portion on porous plate showed a mp of 28-29 C. A gram of this aldehyde and a gram of malononitrile in 25 mL of EtOH was treated with a few drops of triethylamine and gave pale yellow crystals of the malononitrile derivative. This, upon recrystallization from 50 mL boiling EtOH, had a mp of 176-176.5 !C.

  Anal. (C14H12N2O) C,H,N. A side path, other than towards the intended targets 2C-G-3 and G-3, was explored. Reaction with nitroethane and anhydrous ammonium acetate gave the 2-nitropropene analogue which was obtained in a pure state (mp 74-75 !C from MeOH) only after repeated extraction of the crude isolate with boiling hexane. Reduction with elemental iron gave the phenylacetone analogue which was reductively aminated with dimethylamine and sodium cyanoborohydride to give N,N-dimethyl-4-methoxy-2,3-(trimethylene)amphetamine. This was designed for brain blood-flow volume studies after iodination at the 5-position, a concept that has been discussed under IDNNA. It has never been tasted by anyone. The corresponding primary amine, 4-methoxy-2,3-(trimethylene)amphetamine has not yet even been synthesized.

  A solution of 34.8 g 4-methoxy-2,3-(trimethylene)benzaldehyde in 800

  mL CH2Cl2 was treated with 58.6 g of 85% m-chloroperoxybenzoic acid and held at reflux for 3 days. After cooling and standing for a few days, the solids were removed by filtration and washed sparingly with CH2Cl2. The combined filtrate and washings were washed with 200 mL

  saturated NaHCO3, and the solvent removed, yielding 43.5 g of a deeply colored oil. This was dissolved in 150 mL MeOH to which was added 9 g NaOH and all heated to reflux on the steam bath. After 1 h, a solution of 9 g NaOH in 20 mL H2O was added, heated further, then followed by yet another treatment with 9 g NaOH in 20 mL H2O followed by additional heating. All was added to 800 mL H2O, washed once with CH2Cl2 (which removed a trivial amount of material) and then acidified with HCl. The dark crystals that were generated were filtered and air dried to constant weight, yielding 27.5 g dark but nice-looking crystals with a mp of 89-91 !C. By all counts, this should have been the product phenol, 4-methoxy-2,3-(trimethylene)phenol, but the microanalysis indicated that the formate ester was still there. Anal.

  (C10H12O2) requires C = 73.08, H = 7.37. (C11H12O3) requires C =

  68.73, H = 6.29. Found: C = 69.04, 68.84; H = 6.64, 6.58. Whatever the exact chemical status of the phenolic hydroxyl group might have been, it reacted successfully in the following methylation step.

  To a solution of 10 g KOH in 100 g EtOH (containing 5% IPA) there was added 27.5 g of the above 89-91 !C melting material, followed by 25 g methyl iodide. The mixture was held at reflux overnight. All was added to 800 mL H2O, acidified with HCl, and extracted with 3x100 mL

  CH2Cl2. The combined extracts were washed with 3x100 mL 5% NaOH, then once with dilute HCl, and the solvent removed under vacuum yielding 20.4 g of a fragrant crystalline residue. This was recrystallized from 60 mL boiling MeOH to give, after filtering and air drying, 16.0

  g of 1,4-dimethoxy-2,3-(trimethylene)benzene (4,7-dimethoxyindane) with a mp of 86-88 !C. Anal. (C11H14O2) C,H.

  To a mixture of 39.0 g of N-methylformanilide and 35.9 g POCl3 that had been allowed to stand at ambient temperature until deeply claret (about 45 min) there was added 15.8 g of 1,4-dimethoxy-2,3-(trimethylene)benzene. The mixture was heated on the steam bath for 4 h and then poured into 600 mL H2O. After stirring overnight there was produced a heavy crystalline mass. This was removed by filtration and, after air drying, was extracted with 3x100 mL boiling hexane. Pooling and cooling these extracts yielded 9.7 g of salmon-colored crystals with a mp of 67-68 !C. This was recrystallized from 25 mL boiling EtOH to give, after filtration, EtOH

  washing, and air drying to constant weight, 7.4 g of 2,5-dimethoxy-3,4-(trimethylene)benzaldehyde, with a mp of 71-72 !C.

  The mother liquors on cautious treatment with H2O, yielded, after EtOH

  recrystallization, 1 g additional product. Anal. (C12H14O3) C,H. A solution of 150 mg aldehyde and an equal weight of malononitrile in 2.3 mL EtOH treated with 3 drops triethylamine gave immediate yellow crystals of the malononitrile derivative, with a mp of 161-162 !C.

  Anal. (C15H14N2O2) C,H,N.

  A solution 3.7 g 2,5-dimethoxy-3,4-(trimethylene)benzaldehyde in 15 g nitromethane was treated with 0.7 g anhydrous ammonium acetate and heated on the steam bath for 14 h. The volatiles were removed under vacuum, and the residue set up to 3.5 g dark crystals, which melted broadly between 126-138 !C. Recrystallization of the entire mass from 70 mL boiling EtOH gave 3.2 g burnished gold crystals with a mp of 129-137 !C. A further recrystallization of an a
nalytical sample from MeOH gave 2,5-dimethoxy-3,4-(trimethylene)-'-nitrostyrene as yellow crystals with a mp of 146-147 !C. Anal. (C13H15NO4) C,H.

  To a cold solution of LAH in THF (40 mL of a 1 M solution) well stirred and under an inert atmosphere, there was added dropwise 1.05

  mL freshly prepared 100% H2SO4. There was then added, dropwise, a solution of 2.39 g 2,5-dimethoxy-3,4-(trimethylene)-'-nitrostyrene in 25 mL THF. The bright yellow color was discharged immediately. After the addition was complete, stirring was continued for an additional 20

  min, and the reaction mixture brought to a reflux on the steam bath for another 0.5 h. After cooling, the excess hydride was destroyed with IPA (8 mL required) followed by sufficient 15% NaOH to convert the inorganics into a loose, filterable mass. This was removed by filtration, and the filter cake washed with THF. The combined filtrate and washes were stripped of solvent under vacuum, and the residue dissolved in dilute H2SO4. After washing with CH2Cl2, the aqueous phase was made basic with 25% NaOH and extracted with 3x75 mL

  CH2Cl2. After removal of the solvent under vacuum, the residue was distilled at 125-160 !C at 0.45 mm/Hg to yield 0.80 g of a white oil.

  This was dissolved in 8 mL IPA, neutralized with 20 drops of concentrated HCl (the salt crystals started to form before this was completed) followed with the addition of 65 mL anhydrous Et2O. The white crystalline mass was filtered, washed with Et2O, and air dried to provide 1.16 g of 2,5-dimethoxy-3,4-(trimethylene)phenethylamine hydrochloride (2C-G-3) with a mp of 214-216 !C with decomposition.

  Anal. (C13H20ClNO2) C,H.

  DOSAGE: 16 - 25 mg.

  DURATION: 12 - 24 h.

  QUALITATIVE COMMENTS: (with 16 mg) It came on in little leaps and bounds. All settled, and then it would take another little jump upwards. I am totally centered, and writing is easy. My appetite is modest. Would I drive to town to return a book to the library? No ever-loving way! I am very content to be right here where I am safe, and stay with the writing. It does take so much time to say what wants to be said, but there is no quick way. A word at a time.

  (with 22 mg) I walked out for the mail at just about twilight. That was the most courageous thing that I could possibly have done, just for one lousy postcard and a journal. What if I had met someone who had wanted to talk? Towards evening I got a call from Peg who said her bean soup was bubbling in a scary way and what should she do, and I said maybe better make soap. It was that kind of an experience!

  Way up there, lots of LSD-like sparkles, and nothing quite really making sense. Marvelous.

  (with 25 mg) There was easy talking, and no hint of any body concern.

  Sleep that evening was easy, and the next day was with good energy.

  EXTENSIONS AND COMMENTARY: The positives of a completely intriguing altered state free from apparent physical threats, are here coupled with the negative of having to invest such a long period of time.

  There is a merry nuttiness which can give a joyous intoxication, but with the underlying paranoia of how it looks to others. There is an ease of communication, but only within surroundings that are well-known and friendly. This might be a truly frightening experience if it were in an unfamiliar or unstructured environment.

  The numbering of this compound, and all the extensions of GANESHA, have been made on the basis of the nature of the stuff at the 3,4-position. Here there are three atoms (the trimethylene bridge) and so 2C-G-3 seems reasonable. With this logic, the dimethylene bridge would be 2C-G-2 (and the corresponding amphetamine would be G-2, of course). But these compounds call upon a common intermediate which is a benzocyclobutene, OK in principle but not yet OK in practice. The right benzyne reaction will be there someday, and the dimethylene analogues will be made and assayed. But, in the meantime, at least the names have been assigned.

  29 2C-G-4; 2,5-DIMETHOXY-3,4-(TETRAMETHYLENE)PHENETHYLAMINE; 6-(2-AMINOETHYL)-5,8-DIMETHOXY-TETRALIN

  SYNTHESIS: To a solution of 49.2 g 5,6,7,8-tetrahydronaphthol (5-hydroxytetralin) in 100 mL MeOH, there was added 56 g methyl iodide followed by a solution of 24.8 g KOH pellets (85% purity) in 100 mL

  boiling MeOH. The mixture was heated in a 55 !C bath for 3 h (the first white solids of potassium iodide appeared in about 10 min). The solvent was stripped under vacuum, and the residues dissolved in 2 L

  H2O. This was acidified with HCl, and extracted with 4x75 mL CH2Cl2.

  After washing the organic phase with 3x75 mL 5% NaOH, the solvent was removed under vacuum to give 48.2 g of a black residue. This was distilled at 80-100 !C at 0.25 mm/Hg to provide 33.9 g 5-methoxy-1,2,3,4-tetrahydronaphthalene as a white oil. The NaOH

  washes, upon acidification and extraction with CH2Cl2 gave, after removal of the solvent under vacuum and distillation of the residue at 0.35 mm/Hg, 11.4 g of recovered starting phenol.

  A mixture of 61.7 g POCl3 and 54.3 g N-methylformanilide was heated on the steam bath for 15 min which produced a deep red color. This was added to 54.3 g of 5-methoxy-1,2,3,4-tetrahydronaphthalene, and the mixture was heated on the steam bath for 2 h. The reaction mixture was quenched in 1.2 L H2O with very good stirring. The oils generated quickly turned to brown granular solids, which were removed by filtration. The 79 g of wet product was finely triturated under an equal weight of MeOH, filtered, washed with 20 mL ice-cold MeOH, and air dried to yield 32.0 g of

  4-methoxy-5,6,7,8-tetrahydronaphthaldehyde as an ivory-colored solid.

  The filtrate, on standing, deposited another 4.5 g of product which was added to the above first crop. An analytical sample was obtained by recrystallization from EtOH, and had a mp of 57-58 !C. Anal.

  (C12H14O2) C,H.

  To a solution of 25.1 g 4-methoxy-5,6,7,8-tetrahydronaphthaldehyde in 300 mL CH2Cl2 there was added 25 g 85% m-chloroperoxybenzoic acid at a rate that was commensurate with the exothermic reaction. Solids were apparent within a few min. The stirred reaction mixture was heated at reflux for 8 h. After cooling to room temperature, the solids were removed by filtration and washed lightly with CH2Cl2. The pooled filtrate and washes were stripped of solvent under vacuum and the residue dissolved in 100 mL MeOH and treated with 40 mL 25% NaOH.

  This was heated on the steam bath for an hour, added to 1 L H2O, and acidified with HCl, producing a heavy crystalline mass. This was removed by filtration, air dried, and distilled at up to 170 !C at 0.2

  mm/Hg. There was thus obtained 21.4 g of 4-methoxy-5,6,7,8-tetrahydronaphthol as an off-white solid with a mp of 107-114 !C. An analytical sample was obtained by recrystallization from 70% EtOH, and melted at 119-120 !C. Hexane is also an excellent recrystallization solvent. Anal. (C11H14O2) C,H. As an alternate method, the oxidation of the naphthaldehyde to the naphthol can be achieved through heating the aldehyde in acetic acid solution containing hydrogen peroxide. The yields using this route are consistently less than 40% of theory.

  A solution of 21.0 g of 4-methoxy-5,6,7,8-tetrahydronaphthol in 100 mL

  acetone in a 1 L round-bottomed flask, was treated with 25 g finely ground anhydrous K2CO3 and 26 g methyl iodide. The mixture was held at reflux on the steam bath for 2 h, cooled, and quenched in 1 L H2O.

  Trial extraction evaluations have shown that the starting phenol, as well as the product ether, are extractable into CH2Cl2 from aqueous base. The aqueous reaction mixture was extracted with 3x60 mL CH2Cl2, the solvent removed under vacuum, and the residue (19.6 g) was distilled at 90-130 !C at 0.3 mm/Hg to give 14.1 g of an oily white solid mixture of starting material and product. This was finely ground under an equal weight of hexane, and the residual crystalline solids removed by filtration. These proved to be quite rich in the desired ether. This was dissolved in a hexane/CH2Cl2 mixture (3:1 by volume) and chromatographed on a silica gel preparative column, with the eluent continuously monitored by TLC (with this solvent system, the Rf of the ether product was 0.5, of the starting phenol 0.1). The fractions containing the desired ether were pooled, the solvent removed under vacuum and the residue, which weighed 3.86 g, was dissolved in 1.0 mL hexane and cooled with dry ice.
Glistening white crystals were obtained by filtration at low temperature. The weight of 5,8-dimethoxytetralin isolated was 2.40 g and the mp was 44-45 !C.

  GCMS analysis showed it to be largely one product (m/s 192 parent peak and major peak), but the underivitized starting phenol has abysmal GC

  properties and TLC remains the best measure of chemical purity.

  A well-stirred solution of 3.69 g 5,8-dimethoxytetralin in 35 mL

  CH2Cl2 was placed in an inert atmosphere and cooled to 0 !C with an external ice bath. There was then added, at a slow rate, 4.5 mL

  anhydrous stannic chloride, which produced a transient color that quickly faded to a residual yellow. There was then added 2.0 mL

  dichloromethyl methyl ether, which caused immediate darkening. After a few min stirring, the reaction mixture was allowed to come to room temperature, and finally to a gentle reflux on the steam bath. The evolution of HCl was continuous. The reaction was then poured into 200 mL H2O, the phases separated, and the aqueous phase extracted with 2x50 mL CH2Cl2. The organic phase and extracts were pooled, washed with 3x50 mL 5% NaOH, and the solvent removed under vacuum. The residue was distilled at 120-140 !C at 0.3 mm/Hg to give 3.19 g of a white oil that spontaneously crystallized. The crude mp of 1,4-dimethoxy-5,6,7,8-tetrahydro-2-naphthaldehyde was 70-72 !C. An analytical sample from hexane had the mp 74-75 !C. The GCMS analysis showed only a single material (m/s 220, 100%) with no apparent starting dimethoxytetralin present. Attempts to synthesize this aldehyde by the Vilsmeier procedure (POCl3 and N-methylformanilide) gave complex mixtures of products. Synthetic efforts employing butyllithium and DMF gave only recovered starting material.

  To a solution of 1.5 g

  1,4-dimethoxy-5,6,7,8-tetrahydro-2-naphthaldehyde in 20 g nitromethane there was added 0.14 g anhydrous ammonium acetate and the mixture heated on the steam bath for 50 min. The rate of the reaction was determined by TLC monitoring, on silica gel with CH2Cl2 as the moving solvent; the Rf of the aldehyde was 0.70, and of the product nitrostyrene, 0.95. Removal of the volatiles under vacuum gave a residue that spontaneously crystallized. The fine yellow crystals that were obtained were suspended in 1.0 mL of MeOH, filtered, and air dried to yield 1.67 g